Notes On The Documentation; Storing Documents; Symbols Used; Applicability Of The Instructions - Vaillant ecoTEC pro Operating Instructions Manual

1

Notes on the documentation

The following instructions are intended to guide you
throughout the entire documentation. Other documents
apply in addition to these operating instructions.
We accept no liability for any damage caused by failure to
observe these manuals.
Other applicable documents
When operating the ecoTEC pro, you must observe all oper-
ating instructions that are included with other components
of your system.
Further instructions for all accessories and controllers used
also apply.
The benchmark check list for starting up gas-fired boilers
(contained in the installation instructions) must be com-
pleted by the competent person present during the commis-
sioning and must be passed on to the system operator.
After reading through these instructions, if you have any
questions regarding the operation of the boiler, please con-
tact your recognised approved heating specialist company
or Vaillant's technical department.
In these instructions, the heating specialist company and
competent person approved by the Health and Safety Exec-
utive will be abbreviated as the heating specialist company
and skilled tradesman.
1.1

Storing documents

> Store these operating instructions and all other applica-
ble documents in such a way that they are available
whenever required.
> If you move out or sell the house, pass on the documents
to the relevant person as well.
1.2

Symbols used

The symbols used in the text are explained below: Symbols
for identifying dangers are also used in these operating
instructions (¬Section 2.1.1).
i
Symbol that denotes useful tips and infor-
mation
>
Symbol for a required action
Operating instructions ecoTEC pro 0020129673_00
Notes on the documentation
1.3

Applicability of the instructions

These operating instructions apply exclusively to appliances
with the following article numbers:
Boiler Type designation
ecoTEC pro 24 (VUW GB 246/5-3)
ecoTEC pro 28 (VUW GB 286/5-3)
ecoTEC pro 28 (VUW GB 286/5-3) (LPG)
1.1 Type overview
To find out the article number of your boiler, refer to the

identification plate.

1.4 Identification plate
The identification plate of your Vaillant ecoTEC pro boiler is
attached at the factory to the underside of your boiler.
The seventh to sixteenth digits of the serial number on the
identification plate represent the article number.
The serial numbers are also located on a plate, which is
stuck behind the front flap on the underside of the boiler in
a plastic fish plate (¬ Fig. 3.1 Item 2).
1.5

CE label

The CE label shows that the boilers comply
with the basic requirements of the applicable
directives as stated on the identification plate.
i
Vaillant Ltd. supports the Benchmark Initiative.
A benchmark checklist for commissioning gas-
fired boilers is attached to these installation
instructions. It is very important that this docu-
ment be filled out properly when installing, com-
missioning and handing-over to the operator of
the installation.
1
Article number
0010011689
0010011690
0010011718
3