Advertisement
To replace the speaker on an i-Series or NGO/Sota oven:
1. Ensure the oven is removed from any power
source.
2. Open/remove the top cover.
NOTE: For information regarding opening/removing
the top cover, see the service manual.
3. Access the failed speaker (Figures 5, 6, and 7).
4. Replace the speaker.
5.
Ensure functionality and close/replace the top
cover.
To replace the speaker on a conveyor oven:
1. Ensure the oven is removed from any power
source.
2. Access the right end bell.
NOTE: For information regarding accessing the right
end bell, see the service manual.
3. Access the failed speaker (Figures 8 and 9).
4.
Replace the speaker using the HCT-4262 wire to
attach it to the harness.
5.
Ensure functionality and close the right end bell.
—End of Procedure—
Figure 8: HhC 3240 Speaker Location
© 2010 TurboChef Technologies, Inc.
˘
Speaker
Speaker
Figure 5: i5 Speaker Location
Speaker
Figure 6: i3 Speaker Location
Figure 7: NGO/Sŏta Speaker Location
Speaker
Figure 9: HhC 2020 Speaker Location
DOC-1250 / Rev B / April 2010
Speaker
Page 2 of 2
Advertisement
