Setting The Date And Time - Canon EOS REBEL K2 3000V Date Instructions Manual

;Imprinting the Date or Time

Setting the Date and Time

If a picture is taken while the date and time are blinking, the date
and time will not be imprinted on that picture.
The date and time setting can be retained for about 10 min. after
the camera's batteries are removed.
26
Move the < > > arrow to < ; >.
1
2 Select the digit to be set.
Press the < [ > button.
•
•
The digit selection will change in
the following sequence: year,
month, day, hour, minute, " ".
3 Set the correct number.
•
Turn the <l> dial.
•
Repeat steps
date and time digits are set correctly.
4 Finalize the date and time setting.
•
Keep pressing the <[> button
until no digits are blinking.
•
If you press the <[> button while
" " is blinking, 0 sec. will be set.
(DATE Model only)
2 3
and until all the