Canon PIXMA MX892 Network Installation Manual page 13

Installing the Drivers & Software
Installing the PIXMA MX892 on Your Wireless Network
If you can't find your CD-ROM, you may download the MX890 series Mini Master Setup, which includes the same step-by-step installation as the
CD-ROM, by following the instructions below:
1. Click here to access the MX892 Drivers & Software page.
2. Select the operating system and version of your computer (see example below).
3. Expand the 'Drivers' section, if necessary, by clicking the red triangle.
4. Click on 'MX890 series Mini Master Setup' .
5. After reading the details and disclaimer, click 'I Agree – Begin Download' and save the file to your computer.
6. Once the download is complete, double-click the file from its download location to begin the installation.
Return to Setup instructions
<< Previous
13 13