1. Manuals
  2. Brands
  3. Campbell Manuals
  4. Surge Protector
  5. svp48
  6. Instruction manual

Campbell svp48 Instruction Manual

Surge voltage protector
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
SVP48 Surge Voltage Protector
Revision: 3/03
C o p y r i g h t
( c )
1 9 9 5 - 2 0 0 3
C a m p b e l l
S c i e n t i f i c ,
I n c .

Advertisement

Table of Contents
loading

Summary of Contents for Campbell svp48

  • Page 1 SVP48 Surge Voltage Protector Revision: 3/03 C o p y r i g h t ( c ) 1 9 9 5 - 2 0 0 3 C a m p b e l l S c i e n t i f i c ,...

  • Page 2: Warranty And Assistance

    Warranty and Assistance The SVP48 SURGE VOLTAGE PROTECTOR is warranted by CAMPBELL SCIENTIFIC, INC. to be free from defects in materials and workmanship under normal use and service for twelve (12) months from date of shipment unless specified otherwise. Batteries have no warranty. CAMPBELL SCIENTIFIC, INC.'s obligation under this warranty is limited to repairing or...

  • Page 3: Physical Dimensions

    1. Overview The SVP48 provides transient protection for up to 22 conductors. Typical usage is to place the SVP48 in line between sensors and a Campbell Scientific datalogger to supplement the datalogger’s built in surge protection. The SVP48 is designed to mount on Campbell Scientific's standard enclosure back plates with 1 inch centered, pre-punched square accessory mounting holes.

  • Page 4: Installation

    2. Installation 2.1 Mounting the SVP48 Prepare the SVP48 by mounting up to 22 surge protector plates onto the DIN rail as shown in Figure 1. Place the cover plate on the side of the last surge protector. Tighten the clamp screws (yellow/green terminal) on all but one surge protector.

  • Page 5: Maintenance

    2.3 Attaching Sensors to the SVP48 To provide complete protection for the datalogger, all leads must pass through the SVP48. All shield wires terminate in one or more of the yellow/green clamp terminals. To connect signal or excitation leads, insert the bare end of one lead into the terminal on either side of the surge protector.
  • Page 6 SVP48 Surge Voltage Protector This is a blank page.
  • Page 7 This is a blank page.
  • Page 8 Campbell Scientific Companies Campbell Scientific, Inc. (CSI) 815 West 1800 North Logan, Utah 84321 UNITED STATES www.campbellsci.com info@campbellsci.com Campbell Scientific Africa Pty. Ltd. (CSAf) PO Box 2450 Somerset West 7129 SOUTH AFRICA www.csafrica.co.za sales@csafrica.co.za Campbell Scientific Australia Pty. Ltd. (CSA)

Table of Contents