Table of Contents
Advertisement
BEER STORAGE TEMPERATURE
• Draft beer is not pasteurized, so it must be kept cold,
preferably at 38ºF. Temperatures above 38ºF may cause
the beer to become wild, turn sour and cloudy.
TYPICAL BEER SERVING EQUIVALENTS
½ Keg = 15 ½ Gallons = 1984 Fluid Ounces
½ Keg = 6 ¾ Cases of 12 ounce bottles
Overall weight of full ½ Keg is approximately 165 pounds.
¼ Keg = 7 ¾ Gallons = 992 Fluid Ounces
¼ Keg = 3 3/8 Cases of 12 ounce bottles
Overall weight of full ¼ Keg is approximately 82.5 pounds.
ENERGY SAVING TIPS
• Install the beverage cooler in the
coolest part of the room, out of
direct sunlight and away from
heating ducts or registers. Do not
place the beverage cooler next to
heat-producing appliances such
as a range oven or dishwasher.
• Do not overcrowd the beverage cooler or block cold air
vents. Doing so causes the beverage cooler to run longer
and use more energy. Shelves should not be lined with
aluminum foil, wax paper or paper toweling. Liners
interfere with air circulation, making the beverage cooler
less efficient.
• Organize the beverage cooler to reduce door openings.
Remove as many items as needed at one time and close
the door as soon as possible.
BEVERAGE COOLER FEATURES
ADJUSTABLE INTERIOR SHELVES
Multi-position adjustable interior shelves can be moved to
any position for larger or smaller packages. The shipping
spacers that stabilize the shelves for shipping should be
removed and discarded.
OPTIONAL CASTER KIT
If you'd like to make your beverage cooler so it can be rolled
from room to room, there is an optional caster kit available
from your authorized Frigidaire dealer or service center. Just
ask for part number 297027300 - Caster, Rail and Hardware
Kit, which includes 2 fixed casters, 2 swivel casters, 2 caster
support rails and mounting hardware.
CLEANING AND MAINTENANCE
CLEANING THE INSIDE
• Wash inside surfaces of the beverage cooler with a
solution of two tablespoons of baking soda in one quart
(1.136 liters) warm water. Rinse and dry. Wring excess
water out of the sponge or cloth when cleaning in the area
of the controls, or any electrical parts.
• Wash the removable parts with the baking soda solution
mentioned above, or mild detergent and warm water.
Rinse and dry. NEVER use metallic scouring pads,
brushes, abrasive cleaners, or alkaline solutions on any
surface. DO NOT was removable parts in the dishwasher.
h
CLEANING THE OUTSIDE
Wash the cabinet with warm water and mild liquid
detergent. Rinse well and wipe dry with a clean soft cloth.
Replace parts.
8
CASTERS
Hide quick links:
Advertisement
Table of Contents
