Howard Miller 655147 Assembly Instructions

Parts List:
2- Side Frames
The holes in the
bottom of the wine
rack and in the
bottom of the side
frame should be
aligned as shown.
Hole
Faces
In
3. Lay the second side frame down on a clean non-abrasive
surface. Insert the studs on the wine racks into the holes in
the side frame and attach the racks to the side frame as in
step 1.
MODEL 655147
ASSEMBLY INSTRUCTIONS
2- Wine Racks
Note: A Phillips screwdriver is required for assembly.
The studs on the wine
rack must be inserted
ino the holes in the side
frame.
©Copyright Howard Miller Clock Company
1 Tray 4- Feet
Note: When placing the tray on top of the
stand, the metal studs on top of the
stand must be inserted into the holes
in the bottom of the tray so that the
tray does not slide off the stand.
4- Levelers 24- Screws
PD12365
10/08