1. Manuals
  2. Brands
  3. Becker Manuals
  4. Docking Station
  5. TriVision
  6. Installation instructions manual

Becker TriVision Installation Instructions Manual

Car docking station
Hide thumbs Also See for TriVision:
Table of Contents

Advertisement

Quick Links

Download this manual
Installation instructions for the TriVision Car Docking Station
Contents
1.
Symbols used in this installation guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
2.
Prior to installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
3.
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
4.
Installation instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
5.
Components in the installation kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
6.
Connection diagram for TriVision with Car Docking Station . . . . . . . . . . . . . . . . . . . . . . . . 36
7.
Car Docking Station connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
8.
General information on installation of the Car Docking Station . . . . . . . . . . . . . . . . . . . . . . 38
9.
Installation instructions for the mounting plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
10. Routing wiring / Installing antennas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
11. Connecting the power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
12. Final installation of the Car Docking Station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
13. NOTICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

1. Symbols used in this installation guide

G
Warning
denotes instructions which are important for your safety and the safety of others.
denotes instructions which are important for the installation and function of the unit.
Subject to errors and technical changes
30
Copyright by Harman/Becker GmbH, D-76303 Karlsbad

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TriVision and is the answer not in the manual?

Questions and answers

Related Manuals for Becker TriVision

Summary of Contents for Becker TriVision

  • Page 1: Table Of Contents

    Components in the installation kit ..........34 Connection diagram for TriVision with Car Docking Station ......36 Car Docking Station connections .

  • Page 2: Prior To Installation

    Before commencing installation, the vehicle must be checked by a specialist company to determine whether there are any reasons preventing installation of the Car Docking Station for the TriVision, such as a roof antenna etc. It must be ensured that sufficient clearance is maintained for opening an installed tilting/sliding sunroof.
  • Page 3 Installation instructions for the TriVision Car Docking Station Warning Risk of injury Installing the components incorrectly may lead to injuries in the event of a road traffic accident or render safety devices ineffective. Please refer to the instructions provided by the vehicle manufacturer.

  • Page 4: Installation Instructions

    Installation instructions for the TriVision Car Docking Station 4. Installation instructions Damage due to polarity reversal or short-circuit Incorrect cable connections and short-circuits can seriously damage the unit. Disconnect the vehicle battery for the duration of unit installation. In order to avoid short-circuits and malfunctions, install the cables so that they cannot be pinched, kinked, chafed or detached.

  • Page 5: Components In The Installation Kit

    Installation instructions for the TriVision Car Docking Station 5. Components in the installation kit A. Car Docking Station B. Mounting plate C. Installation parts for attaching purposes - adhesive tape / Velcro strip / screws / nuts / washers / plastic clips / plastic threaded rod D.
  • Page 6 Installation instructions for the TriVision Car Docking Station Subject to errors and technical changes Copyright by Harman/Becker GmbH, D-76303 Karlsbad...

  • Page 7: Connection Diagram For Trivision With Car Docking Station

    Installation instructions for the TriVision Car Docking Station 6. Connection diagram for TriVision with Car Docking Station DVD player Antenna 1 Becker (optional) Adapter box Connection Connection cable Video/audio in cable Video/audio out Docking Station (Playstation) Video/audio in (optional) Power supply Antenna 2 All components are connected to the Car Docking Station.

  • Page 8: Car Docking Station Connections

    Installation instructions for the TriVision Car Docking Station 7. Car Docking Station connections Power supply connection Fixture for base Fixture for plate locking tab base plate locking tab Connection for Connection for antenna 1 antenna 2 Connection for DVD player (Becker)

  • Page 9: General Information On Installation Of The Car Docking Station

    TriVision, as well as viewing of the TriVision are prevented even when the driver seat is in the rearmost position. When deciding on the best installation position, ensure that the TriVision is not a nuisance to the driver or does not obstruct his view either when open or closed.
  • Page 10 • The third attachment secures the mounting plate (B) during folding out of the TriVision. This attachment can be made directly to the roof panel by installing the plates (D), the plastic threaded rod and the double-sided adhesive tape in- cluded in the installation kit.
  • Page 11 Installation instructions for the TriVision Car Docking Station Checking the installation options in your vehicle • Consult a specialist company to check the installation options in your vehicle. • In vehicles equipped with a sunroof, the mounting plate of the Car Docking Station can usually be fastened directly onto the struts to which the frame of the sunroof is also attached.

  • Page 12: Installation Instructions For The Mounting Plate

    In order to prevent head injuries and driver distraction during driving, the Car Docking Station must be installed such that the possibility of contact between the driver's head and the TriVision, as well as viewing of the TriVision are prevented even when the driver seat is in the rearmost position.
  • Page 13 Installation instructions for the TriVision Car Docking Station Attachment options on the mounting plate 3. Attachment point with the plates (D) and the threaded rod when using the main attachment Optional Optional main attachment main attachment to the roof strut...
  • Page 14 Installation instructions for the TriVision Car Docking Station Determining the central axis of the vehicle • Determine the central axis by measuring the width of the vehicle. Mark the central axis. This permits you to attach the mounting plate (B) centrally.
  • Page 15 Installation instructions for the TriVision Car Docking Station Cutting out the cutout for the mounting plate • Cut along the markings you made previously using a sharp knife. If the thickness of the headliner material exceeds 8 millimetres, it must be reduced to approx. 8 millimetres. Remove the required amount of material on the upper side of the headliner.
  • Page 16 Installation instructions for the TriVision Car Docking Station Marking the drill holes for the main attachment • Position the mounting plate (B) correctly between the headliner and the roof strut. • The two elevated recesses are used (elevated part against the roof strut) for subsequently screwing on the mounting plate (B).
  • Page 17 Installation instructions for the TriVision Car Docking Station 9.10 Determining the third attachment point • In vehicles without a sunroof, it is usually possible to attach the mounting plate (B) to a third point on the roof panel. • The third attachment point of the mounting plate (B) can be attached to the roof by using the double-sided adhesive tape, the threaded rod and the plates (D) included in the installation kit.
  • Page 18 Installation instructions for the TriVision Car Docking Station 9.11 the mounting plate to the support struts • Drill holes with the correct diameter (for the sheet-metal screws be- ing used) in the holes marked on the roof strut, see 9.8 on page 45.
  • Page 19 Installation instructions for the TriVision Car Docking Station 9.12 Preparing/fastening the mounting plate attachment point • There are two fastening options: 1. Use one of the plates (D) provided and attach the 8 mm plastic threaded rod using the washers and nuts provided. Counterhold the nuts when fastening.

  • Page 20: Routing Wiring / Installing Antennas

    Installation instructions for the TriVision Car Docking Station 10. Routing wiring / Installing antennas In order to avoid short-circuits and malfunctions, install the cables so that they cannot be pinched, kinked, chafed or detached. • Route the audio/video in, audio/video out (optional), power supply and both antenna cables in the required positions.
  • Page 21 Installation instructions for the TriVision Car Docking Station 10.1 Connecting adapter box for audio/video in • Attach the adapter box (E) (two screws) and open the adapter box. • Loosen the cable clip screw. • Connect the audio/video in cable to the white socket. The connector can only be attached in one direction.
  • Page 22 Installation instructions for the TriVision Car Docking Station 10.2 Installation of both antennas • Two window antennas are provided for mobile television reception. These are self-adhesive window antennas for the vehicle interior. The adhesive surface of the antenna is protected by a backing film (length 45 cm). If the antenna provided is too long, antennas with an adhesive surface length of 35 cm are optionally available.
  • Page 23 Installation instructions for the TriVision Car Docking Station • Remove the backing film and attach the antenna to the window. It may be advisable to fasten the antenna in place using removable tape in order to perform any necessary reception tests prior to installation.

  • Page 24: Connecting The Power Supply

    Installation instructions for the TriVision Car Docking Station 11. Connecting the power supply In order to avoid short-circuits and malfunctions, install the cables so that they cannot be pinched, kinked, chafed or detached. • Connect the power supply cable (M).

  • Page 25: Final Installation Of The Car Docking Station

    Installation instructions for the TriVision Car Docking Station 12. Final installation of the Car Docking Station • Fasten the mounting plate (B) to the three attachment points. In order to prevent short-circuits and malfunctions, install the cables so that they cannot be pinched, kinked, chafed or detached.
  • Page 26 Take special care not to pinch or damage any wiring in the process. • Reconnect the vehicle battery. • Insert the TriVision into the Car Docking Station as described in the Operation Guide. • The TriVision is now ready for operation. Subject to errors and technical changes...

  • Page 27: Notice

    Installation instructions for the TriVision Car Docking Station Dear Listener, In conformance with current EC guidelines, any person may operate this radio receiver. This unit conforms to the current valid European or harmonised national standards. This designation is your guarantee that the unit conforms to the applicable specifications regarding electromagnetic compatibility.
  • Page 28 Installation instructions for the TriVision Car Docking Station 13.1 Correct disposal of this product (waste electrical and electronic equipment) (Applicable in European Union countries and other European countries with a separate collection scheme) The label on the product or on the accompanying literature indicates that at the end of its life it cannot be disposed of to- gether with normal household waste.

Table of Contents