Table of Contents
Advertisement
Edge Feather Submenu
The Edge Feather Submenu contains the controls to define the edge feather characteristics.
Left Feather
Left Edge Feathering can be Enable/Disable by this control. The default is set to Disable.
Left Width
The width of the left feathering area is a value between 0 and half the horizontal width of the input. The default is set
to 64.
Left Gamma
The gamma value applied to the left edge feathering equation. The default is set to 1.0.
Right Feather
Left Edge Feathering can be Enable/Disable by this control. The default is set to Disable.
Right Width
The width of the left feathering area is a value between 0 and half the horizontal width of the input. The default is set
to 64.
Right Gamma
The gamma value applied to the left edge feathering equation. The default is set to 1.0.
Curve
The Curve selects the edge feather function from 1
equation.
Manual # 26-0208100-00 / Revision E
EDGE FEATHER
LEFT FEATHER
LEFT WIDTH
LEFT GAMMA
RIGHT FEATHER
RIGHT WIDTH
RIGHT GAMMA
CURVE EQUATION
st
, 3
DIS
64
1.0
DIS
64
1.0
3rd
rd
th
th
th
, 5
, 7
or 9
order equation. The default is the 3
ScreenSHAPER – Video Mapping System 21
rd
order
Advertisement
Table of Contents
