Subscribe to Our Youtube Channel
Summary of Contents for Sun bright ADP-SU33
- Page 1 USER MANUAL SATA HDD Docking Model : ADP-SU33 SATA to USB2.0 and eSATA / One Touch Backup...
- Page 2 FCC COMPLIANCE STATEMENTS This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, there is no guarantee that interference will not occur in a particular installation.
-
Page 3: Table Of Contents
3. Product Overview..........................5 3.1 Product Components ......................5 3.2 Minimum System Requirements ..................6 3.3 Take a look to ADP-SU33 ....................7 3.4 Start to Assemble ........................ 8 4. Using the Docking ........................... 9 4.1 Using in Windows Vista、Windows XP、Windows 2000 、Windows ME and Mac OS .............................. - Page 4 Safety Warning Please read this user manual carefully before using this product. 1. Always unplug the power cord before assemble Hard Drive. 2. Do not use a power adapter with different voltage rating. It will damage this product. 3. Keep this equipment away from humidity or any type of moisture. 4.
-
Page 5: Introduction
1. Introduction ADP-SU33 is a compact-designed external device station for 2.5” or 3.5” SATA drives. No more tools to assemble HDD in an enclosure is needed. Set your HDD with the Docking is absolutely more convenient and safer than having your drive sit on the desk with SATA-to-USB adapters ! Compliance with USB2.0 &... -
Page 6: Minimum System Requirements
2. Connect ADP-SU33 and computer with eSATA cable then power on ADP-SU33. 3. Power on your computer. 4. Check ADP-SU33 can be detected or not. If ADP-SU33 still can not be detected, it means your motherboard does not support eSATA function. ◆... -
Page 7: Take A Look To Adp-Su33
3.3 Take a look to ADP-SU33 ○ 1 Hard Disk Dock ○ 2 One Touch Backup Button ○ 3 Power LED ○ 4 Access LED ○ 5 USB 2.0 Connector ○ 6 eSATA Connector ○ 7 DC Jack Power Switch ○... -
Page 8: Start To Assemble
3.4 Start to Assemble 1. The docking supports 2.5” or 3.5” SATA HDD directly plug in to the SATA connector , which is instructed by below photo 1 and 2. 2. You can easily hot-swap the HDD by directly pulling it out from the docking , which is instructed by below photo 3 and 4. -
Page 9: Using The Docking
4. Using the Docking 4.1 Using in Windows Vista、Windows XP、Windows 2000 、Windows ME and Mac OS The Docking can work under Windows Vista/XP/2000/ME and Mac OS without any extra driver. 4.2 Using in Windows 98SE 1. Find Windows 98 driver , it is ” SPIF225_Installer.exe ” which you can find from driver CD 2. -
Page 10: Formatting Hdd
Note 1. If you can see the USB icon, but can’t find new disk appearing in your computer, please check if ： the hard disk was partitioned. 2. If HDD has been partitioned , please make sure the format of your HDD is FAT32. Because Windows 98 doesn’t support NTFS format of HDD. -
Page 11: Otb Function
5. OTB Function One Touch Backup (OTB) is the file backup function between the external drive and PC. You can use it to backup your file from PC to the Docking. OTB will create a new folder ”FilesBackup” to save your files when you. - Page 12 Formatted through the Disk Management tool provided by Windows systems, the maximum formatted capacity of FAT32 is 32GB. Does the Docking supports multiple partitions with different formats (FAT32 or NTFS)？ Yes. The Docking can support multiple partitions with different formats. You can format it under FAT32 and NTFS depending on your demand.
Need help?
Do you have a question about the ADP-SU33 and is the answer not in the manual?
Questions and answers