Explains the charged part the category with battery ,please consult this page's content, the category without battery ,need not pay attention to this Page. Charge time:5 hours. Battery time:1.5 hour Charge indicator +13.8V DC input jack 1 The battery of the charged lithium is built into this machine. 2 charge Connect with power supply to dc input 13.8V(25) ①...
Page 3
5.Basic Operation Methods TFT Menu Chart...
Page 5
MPEG4、 JPEG, MPEG 4: 4 and 5 versions without QPEL and GMC AC/DC adaptor:AC 100/240V-50/60Hz DC adaptor +12V(car cigaretter lighter) ;( ) 1 about 2000g with battery 2 about 1850g without battery 0. 1000 3000...
Page 8
IN TV mode press menu button on remote control it will appear the following functions:brightness, contrast, color, OSD language With battery SWAP 26.Charge indicator 27.Power input DC+13.8V Press menu button again on remote control to show the following functions: recharge battery Automatic search manual search fine tuning band,Position,skip,color system, audio /...
DVB/ DVD/ SCREEN SAVER: *Notice On DVD mode,when the unit is stopped,it will start the screen 1 In DVD mode Keep press mode key can change to DVB mode saver after 3 minutes.Then In DVB mode Keep press mode key can change to DVD mode around 5 minutes later,it will 2 In DVD mode,Keep press Is STOP EJECT function...
Page 10
104 DVD DVB TV TIME ZONE: If you fixup the country of searching channel, you can not adjust the time zone.You should restore firstly,then re-connect the power,and pls don't search channel at this moment,then you can press "SETUP" to select the time zone.Use "UP"...
Page 11
Book list It shows the programmer events which you have recorded in EPG menu or added manually.To manually set the program on book list you can move with arrow buttons and select the desired parameters.
5. Basic Operation Methods Basic interface connection 5.1.Installation Method of Base Support: Align the screw bolt on the base support with the bottom groove on hardware piece of the rear TV cover before moving upward and rotating the fixation button till fix the TV set onto the support.
Page 16
IN on mode the screen saver will start .when the unit is in stop or pause mode for few minutes, the screen saver will start to protect the screen, After few minutes the screen saver is working, the unit will switch to standby mode.
Need help?
Do you have a question about the DA104CD and is the answer not in the manual?
Questions and answers