Hotpoint WDD 960 P Instructions For Use Manual
Hide thumbs
Also See for WDD 960 P:
- Instructions for use manual (16 pages) ,
- Instructions for use manual (17 pages) ,
- Instructions for use manual (16 pages)
Table of Contents
Advertisement
Instructions for use
GB
English,1
WDD 960 P/G/A/K
!
This symbol reminds you to read this instruction manual.
Contents
Installation, 2-3-4-5
Connecting the electricity and water supplies
Cutting off the water or electricity supply
Troubleshooting, 13-14
Assistance, 15-16
WASHER DRYER
1
GB
Advertisement
Table of Contents
Related Manuals for Hotpoint WDD 960 P
Summary of Contents for Hotpoint WDD 960 P
-
Page 1: Table Of Contents
Technical data Description of the washer dryer, 6-7 Control panel Display How to run a wash cycle or a drying cycle, 8 WDD 960 P/G/A/K Wash cycles and functions, 9 Table of wash cycles Wash functions Detergents and laundry, 10... -
Page 2: Installation
Installation 2. If the floor is not perfectly level, compensate for any Keep this instruction manual in a safe place for future unevenness by tightening or loosening the adjustable reference. Should the appliance be sold, transferred or front feet (see figure); the angle of inclination, measu- moved, make sure the instruction manual accompanies the red according to the worktop, must not exceed 2°. - Page 3 Connecting the drain hose • the supply voltage is included within the values indicated on the Technical details table Connect the drain hose, (see page 5); without bending it, to a draining duct or a wall • the socket is compatible with the washing drain situated between machine’s plug.
-
Page 4: The First Wash Cycle
As the colours of the wires in the lead may not corre- The first wash cycle spond with the coloured markings identifying the termi- nals in your plug, proceed as follows: Once the appliance has been installed, and before you Connect Green &... -
Page 5: Technical Data
Technical data WDD 960 P/G/A/K Model width 59.5 cm Dimensions height 85 cm depth 53.5 cm from 1 to 7 kg for the wash programme Capacity from 1 to 5 kg for the drying programme Electrical please refer to the technical data plate... -
Page 6: Description Of The Washer Dryer
Description of the washer dryer Control panel CHILD LOCK button ON/OFF SPIN SPEED DRYING button button button DISPLAY START/PAUSE Detergent dispenser drawer MEMORY button with button FUNCTION indicator light WASH CYCLE buttons SELECTOR buttons DELAYED TEMPERATURE START button button Detergent dispenser drawer: used to dispense de- CHILD LOCK button: to activate the control panel lock, tergents and washing additives (see “Detergents and press and hold the button for approximately 2 seconds. - Page 7 Display The display is useful when programming the machine and provides a great deal of information. The upper two strings A and B are used to display the selected wash cycle or the type of drying selected, the current wash cycle phase (the selected dryness level or drying time) and all the indications relating to the progress status of the cycle.
-
Page 8: How To Run A Wash Cycle Or A Drying Cycle
How to run a wash cycle or a drying cycle 1. SWITCH THE MACHINE ON. Press the button; the text Drying only HELLO will appear on the display and the START/PAUSE Select a drying setting ( ) using the WASH indicator light will flash slowly in a green colour. -
Page 9: Wash Cycles And Functions
Wash cycles and functions Table of wash cycles Max. load Detergents Max. Max. (kg) Cycle Description of the wash cycle temp. speed Drying duration Wash Fabric Normal Mini (°C) (rpm) softener load Everyday wash cycles (Daily) Cottons (1) (1st press of the button): extremely soiled whites. 90°... -
Page 10: Detergents And Laundry
Detergents and laundry Detergent dispenser drawer Garments requiring special care Good washing results also depend on the correct Curtains: fold curtains and place them in a pillow case dose of detergent: adding too much detergent will not or mesh bag. Use wash cycle necessarily result in a more efficient wash, and may in Wool: Scholtès is the only washer dryer manufacturer to fact cause build up on the inside of your appliance and... -
Page 11: Precautions And Tips
Precautions and tips been washed with flammable solvents (e.g. trichlo This Washer-dryer was designed and constructed in rethylene). accordance with international safety regulations. The • Do not use the appliance to dry foam rubber or following information is provided for safety reasons and similar elastomers. -
Page 12: Care And Maintenance
Care and maintenance Cutting off the water and electricity sup- 2. unscrew the lid by rota- plies ting it anti-clockwise (see figure): a little water may trickle out. This is per- • Turn off the water tap after every wash cycle. This fectly normal;... -
Page 13: Troubleshooting
Troubleshooting Your washer dryer could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure that the problem cannot be not solved easily using the following list. Problem: Possible causes / Solutions: The machine does not switch on. • The appliance is not plugged into the socket fully, or not enough to make contact. - Page 14 The machine vibrates a lot during • The feet have not been adjusted, enabling the machine to rock. the spin cycle. • New Installation - Either the Transit Bolts including the plastic spacers, or the Polystyrene Packaging have not been removed when installing the machine. • The machine is trapped between cabinets and/or walls. • The load is in a slight out of balance condition and machine is spinning, but at a lower speed. The machine is noisy. • There will always be some motor, pump and drum noise during spin. The machine wont spin properly. • Out of Balance detected when attempting to go into a spin cycle - If this happens the ma- chine will continue to try to repeat the distribution of the load required before the machine will go into higher spin speeds - This will increase the programme time accordingly.
-
Page 15: Assistance
DOMESTIC PREMISES. 5 Year Parts Guarantee Hotpoint also offers you a free 5 year parts guarantee. This additional guarantee is conditional on you registering your appliance with us and the parts being fitted by one of our authorised engineers. There will be a charge for our engineer’s time. -
Page 16: After Sales Service
195081735.04 09/2010 - Xerox Fabriano After Sales Service No one is better placed to care for your Hotpoint appliance during the course of its working life than us - the manufacturer. Essential Contact Information Hotpoint Service We are the largest service team in Europe offering you access to 400 skilled telephone advisors and 1000 fully qualified engineers on call to ensure you receive fast, reliable, local service.