8. The product is ready for operation. Slowly increase the LEVEL control to the desired operating level. Avoid illuminating the PEAK indicator and do not apply too much power to the speakers. 9. Operate the product and the system in a manner which DOES NOT illuminate the PEAK warning indicator. HD-100...
- Front panel indicators for signal strength, clip, protect, and power - Rack Ears for permanent installation in a standard 19” (rack mount width) enclosure. - Detachable AC power cord Accessories One detachable AC power cord is provided for use with this product. HD-100...
Front Panel POWER TECHNOLOGY HD-100 1. LEVEL CONTROL This determines the level of the input signal for each channel. In stereo mode the knobs will determine the signal level independently for each channel. In the bridge mono mode only the channel 1 level control is used.
INPUT CAUTION CHANNEL 2 CHANNEL 1 CHANNEL 2 CHANNEL 1 TECHNOLOGY TO REDUCE THE RISK OF ELECTRIC SHOCK, MODEL NO. HD-100 BALANCED BALANCED DO NOT REMOVE COVER. REFERENCE AMPLIFIER 0dBm NO USER SERVICEABLE 0dBm RATED OUTPUT 150W/CH @4 STEREO PARTS INSIDE. REFER...
INPUT CAUTION CHANNEL 2 CHANNEL 1 CHANNEL 2 CHANNEL 1 TECHNOLOGY TO REDUCE THE RISK OF ELECTRIC SHOCK, MODEL NO. HD-100 BALANCED BALANCED DO NOT REMOVE COVER. REFERENCE AMPLIFIER 0dBm NO USER SERVICEABLE 0dBm RATED OUTPUT 150W/CH @4 STEREO PARTS INSIDE. REFER...
INPUT CAUTION CHANNEL 2 CHANNEL 1 CHANNEL 2 CHANNEL 1 TECHNOLOGY TO REDUCE THE RISK OF ELECTRIC SHOCK, MODEL NO. HD-100 BALANCED BALANCED DO NOT REMOVE COVER. REFERENCE AMPLIFIER 0dBm NO USER SERVICEABLE 0dBm RATED OUTPUT 150W/CH @4 STEREO PARTS INSIDE. REFER...
INPUT CAUTION CHANNEL 2 CHANNEL 1 CHANNEL 2 CHANNEL 1 TECHNOLOGY TO REDUCE THE RISK OF ELECTRIC SHOCK, MODEL NO. HD-100 BALANCED BALANCED DO NOT REMOVE COVER. REFERENCE AMPLIFIER 0dBm NO USER SERVICEABLE 0dBm RATED OUTPUT 150W/CH @4 STEREO PARTS INSIDE. REFER...
Send Insert Points Sleeve Ring Amp/Line Input 3 Pole (Stereo) Jack Hot ( positive ) Cold ( negative ) Screen Sleeve Ring Headphones Left Signal Right Signal Ground Sleeve Unbalanced Input/Output 2 Pole (Mono) Jack AUX Send Signal Ground HD-100...
Page 13
Bridged Mono uses the Positive terminals from both channels, the negative terminals have no connection. Bridged Mono operation has an impedance limitation of 8 . BRIDGED MONO CONNECTION OUTPUT CHANNEL 2 CHANNEL 1 BRIDGED MONO (8 ~16 ) Negative Positive NOT CONNECTED NOT CONNECTED BRIDGED MONO BRIDGED MONO Positive Negative Positive Negative HD-100...