Advertisement
Quick Links
Advertisement
Summary of Contents for AMC S84d
- Page 3 The AMC model S84d Remote Souce Selector is designed for room to room type of applications, providing remotely controlled distribution of high quality audio and video signals throughout a house, through the infrared remote control of centrally located audio and video components.
- Page 4 1. AC LINE CORD 2. AUDIO INPUTS, A1 Through A4 3. AUDIO/VIDEO INPUTS, AV5 Through AV8 4. INFRARED CODE INPUTS, ROOMS A Through D 1. INPUT SELECTOR LED'S 2. ROOM LED'S A Through D 5. BUFFERED VIDEO OUTPUTS 6. ROOM OUTPUTS A Through D 7.
- Page 5 LED for situations where remotely controlled equipment cannot see the infrared code sent out by the S84d I/R transmitter. For example, when the equipment is located in a shelved cupboard.
-
Page 6: Infrared Transmitter
The front panel LED display is used to view the status of the selected input of any room. 1. INPUT SELECTOR LEDS There are 8 LEDs arranged in 2 rows, in the front panel display. These LEDs indicate the selected input (A1 through AV8) of each room. -
Page 7: Input Selector
Note there are two types of remote control available for this model. However, only one of them will be supplied with the unit. Please verify the type of R/C attached with your unit, and refer to the corresponding instruction. 1. POWER Pressing the green "POWER"... -
Page 8: Power Off
" M u t e " b u t t o n , s i m u l t a n e o u s l y, switches on the power to the convenience outlet sockets on the back of the S84d. 2. POWER OFF Pressing the green "Power"... - Page 9 AUDIO INPUTS A1 Through AV8 and ROOM OUTPUTS A Through D Inputs Impedence...R= 5 MEG C= 100pF THD 20Hz-20KHz and SMPTE IMD...<0.01% at 3 Vrms Inputs Sensitivity for 1V Output...150 mV Input Overload...3.5 Vrms Signal to Noise Ratio (Gain=1)...95dB "A" wtd ref. 1V Frequency Responce...20Hz-20KHz +/- 0.5dB Output Impedence...75 OHM VIDEO INPUTS and OUTPUTS AV5 Through AV8...
- Page 10 National Fire Protection Association (Batterymarch Park, Quincy. MA 02269). Antenna Lead In Wire Antenna Ground Discharge Clamp Unit (NEC Section 810.20) Grounding Conductors (NEC Section 810.21) Ground Clamps Power Service Grounding Electrode System (NEC Art 250 Part H) AMC 21-3004...