Page 1
10x65Z, 16x65Z ARMY MILDOT u s e r ` s g u i d e Important Export Restrictions! Commodities, prod- ucts, technologies and services contained in this manual are subject to one or more of the export control laws and regulations of the U.S.
Page 3
• Eye Relief: 3” (75mm); sufficient for operation with large calibers and/or protective glasses or gas mask. * ATN reserves the right to change the above specifications at any time without notice AppLIcATIOn The ATN 10x65Z and 16x65Z Army Mil-Dot...
Page 4
Next, focus the front lens until the image and The ATN Mounting System allows to change the the grain are both sharp. position of the riflescope flexibly on the weapon...
Each mechanisms (remove dust caps first). Each graduation interval equals to 10 clicks. click equals to 1/6 inches at 100 yards (10x65z) and 1/10 inches at 100 yards (16x65z). When NOTE: Each click of adjustment changes...
Page 6
Wipe down the scope with a damp cloth ments, it should be returned to ATN’s service and follow with a dry cloth. Finally, going over department. The exposed optical surfaces...
ATN, at its option, will either repair or replace or customer’s dealer. ATn shall not, in any the product, and such action on the part of ATN event, be liable for special, indirect, inciden shall be the full extent of ATN’s liability, and the tal, or consequential damages, including, Customer’s sole and exclusive remedy.
Need help?
Do you have a question about the 10x65Z and is the answer not in the manual?
Questions and answers