Freecom MediaPlayer-3 Manual page 15

4.2 Player Setup
Press the [BOOKMARK] button during file playback, the playing time will be
stored into the memory.
The player will automatically start playing from the position you stored when
the [PROGRAM] button is pressed again on the main OSD menu.
1. Press the SETUP button on your remote control, a menu will appear with the
available options.
2. Adjust the player to your specific requirements and hardware.
3. Press SETUP button again to return to the main menu.
Please note: You can always return to the default factory settings.
Advanced File Auto Play
Option
DVD Menu Start
AVI Move Set
Slide Delay Time
Font Color
Remote Key
Input
AUDIO/ HD-Component
VIDEO Out
TV Out
BT, CT, ST
Audio Out
Playing Multimedia files on TV/HiFi
On(W.Folder) Play all files upon turning on
On(WO.Folder) Play files only in the root folder upon turning
on.
Off Display menu without starting files.
On Starting with DVD Menu.
Off Starting without DVD Menu
Move X Adjust FAST SKIP by 8x / 16x / 32times
Move MIN Adjust FAST SKIP by 1, 5, 10, 15, 20minutes
1, 2, 3, 4, 5, 6, Adjust slide show time interval by seconds.
7 Sec
White-Black / Adjust subtitle border color.
Black-White
Yellow-Black /
Black-Yellow
Repeat On / Set remote to act repeatedly.
Repeat Off
480p, 720p, Make sure your TV set supports progressive
1080i, Off video input before setting the MPEG4 player
to progressive mode. Otherwise, a blank
screen will show on your TV.
After connecting to 1080i mode, screen
flickering is a normal thing and interlaced
mode is suitable for moving picture not for
documentation and graphic works.
S-Video Set when connected to S-video cable.
YPbPr Set when connected to Component cable.
Bright, Adjust video color setting.
Contrast, Satu-
ration
Analog/DPCM Set when connected to Stereo cable(L/R).
Embed Digital Set when connected to Optical cable.
The digital 5.1ch optical output will be
enabled.
GB
4
15