Connecting Other Additional Device; Using Ac Power - Philips WAS7000 User Manual

3.3.3 Connecting to other additional
devices
It is possible to play audio output from an
external source, e.g.TV,VCR, Laser Disc player,
DVD player on the Station.
On the additional device
1
Connect one end of the audio cable (not
supplied) to the AUDIO OUT terminals on the
additional device
On the Station
2
Connect the other end of the audio cables to the
AUX IN terminals on the Station
3
To playback audio output from the additional
device, press SOURCE to select AUX mode on
the Station (see 8. External source)
Helpful hints:
– If the connected device has only a single audio
out terminal, connect it to the AUX IN left terminal.
Alternatively, you can use a "single to double" cinch
cable, but the output sound still remains as mono.
– Always refer to the owner's manual of the other
equipment for complete connection.
R L
AUX
IN
3. Installation

3.4 Using AC power

1
Make sure that all connections have been made
before switching on the power supply
2
Connect the AC power cord to the wall socket.
This switches on the power supply
When the Station is switched to standby mode,
they will still be consuming some power. To
disconnect the system from the power
supply completely, remove the power plug
from the wall socket.
Helpful hint:
– Always press and hold STANDBY-ON to switch
the set to power-saving mode before removing its
power plug.
The rating label is located on the backside
of the set.
For users in the U.K.: please follow the
instructions on page 2.
17