Summary of Contents for Patton electronics IM1RC/D
- Page 1 USER MANUAL MODEL IM1RC/D X.21 Daughter Board on Rack Card SALES OFFICE Part# 07MIM1RC/D-B Doc# 038031UB (301) 975-1000 Revised 11/01/00 TECHNICAL SUPPORT (301) 975-1007 http://www.patton.com An ISO-9001 Certified Company...
-
Page 2: Warranty Information
However, there is no guarantee that interfer- ence will not occur in a particular installation. If the Model IM1RC/D does cause interference to radio or television reception, which can be... -
Page 3: General Information
Panel 2.2 DESCRIPTION The Patton Model IM1RC/D is an option board which implements a low-power X.21 interface. The Model IM1RC/D is designed for use with Patton Electronics rack cards: 1045RC, 1092RC, 1092ARC, Front X.21 1095RC, 2500RC, 2703RC and 2715RC. The Model IM1RC/D sup- ports data rates up to 2.304 Mbps. - Page 4 APPENDIX A The DCE/DTE selector must be installed in the X.21 daughter board for any configurations. The following information describes the setting for DCE/DTE. PATTON ELECTRONICS MODEL IM1RC/D (X.21 DAUGHTER BD) SPECIFICATIONS DCE Setting: To set a rack card as a DCE device install the DCE/DTE...
- Page 5 APPENDIX C APPENDIX B PATTON ELECTRONICS MODEL IM1RC/D (X.21 DAUGHTER BD) PATTON ELECTRONICS MODEL IM1RC/D (X.21 DAUGHTER BD) The following list provides the part numbers for the Rack Cards, the rear cards and the type of connectors used. The X.21 daughter- board may be used with the specified rack card and rear card combi- nations listed.