Subscribe to Our Youtube Channel
Summary of Contents for Western Digital WD1006V-MM1
- Page 1 USER'S GUIDE WD1006V-MM1 Winchester Disk Controller WD 1006 V-MM2 Winchester/Floppy Disk Controller Important Information Do Not Discard...
- Page 2 Product Description 3. Remove the blank expansion slot bracket. Put the bracket TABLE 1. JUMPER SETTINGS away and save it for possible future use. The screw will be This document describes the hardware and software installation of the used to hold the new controller board in place. It is best to WDl006V-MMl and WDl006V-MM2, 16-bit disk controllers for the locate the controller in the closest available expansion slot IBM * Personal Computer AT * or AT compatible computer.
-
Page 3: Software Installation
Software Installation This section contains instructions for low level formatting the Winchester drives. 1. Insert our Advanced diagnostic diskette (or equivalent or AT compatibles). 2. Turn on the power. 3. Boot the diagnostic and select the setup option. CAUTION Avoid system damage by consulting your system technical reference manual to ensure that your Winchester drive type is supported by the host BIOS drive tables.
Need help?
Do you have a question about the WD1006V-MM1 and is the answer not in the manual?
Questions and answers