To Connect Using Qss; Pbc (Push Button Configuration) Method - TP-Link TL-WN822N User Manual

3.2 To connect using QSS

QSS (Quick Secure Setup) function allows you to add a new wireless device to an existing
network quickly.
If the wireless router supports QSS or Wi-Fi Protected Setup (WPS), you can establish a
wireless connection between wireless card and router using either Push Button Configuration
(PBC) method or PIN method. Three QSS connection methods are listed in the following parts
while the third method is only supported in Windows XP and Windows Vista.

3.2.1 PBC (Push Button Configuration) method

1. Press the QSS button on the back panel of the router. Here takes router TL-WR741ND for
example.
2. Press the QSS button on the adapter. There are two ways:
Method One：

Press and hold the QSS button on the adapter directly for 2~3 seconds until Figure 3-9
appears.
TL-WN822N 300Mbps High Gain Wireless N USB Adapter
Figure 3-6
Figure 3-7
12