Q1. How Do I Restore My Modem Router's Configuration To Its Factory Default Settings; Q2. What Can I Do If I Don't Know Or Forgot My Password; Q3. Why Can't I Open Some Websites Like Www.msn.com Or It Opens Very Slowly - TP-Link TD-W8901G Advanced Troubleshooting Manual

Hide thumbs Also See for TD-W8901G:

Table of Contents

Appendix - FAQ

Q1. How do I restore my modem's configuration to its factory default settings?

With the Router powered on,

press and hold the Reset button

on the rear panel for 8 to 10

seconds before releasing it.

Press it for 8 to 10 seconds

Once the Router is reset, the current configuration settings will be lost and you will need to

Note

re-configure the router.

1) Restore the Router's configuration to its factory default settings. If you don't know how to do that,

please refer to section Q1.

2) Use the default user name and password: admin, admin.

Some website or routers requires lower MTU size, please change the default 1480 bytes to lower and

try again.

1) Login to the Web-based configuration page and go to Interface Setup – Internet;

2) Locate the TCP MTU Option and change the default MTU size to 1440 or lower.

9 / 15

Table of Contents