Table of Contents
Advertisement
o
peraTIon
-
break
In
1. ProPaddle sweeper drums with new paddle belts must be broken-in
before use to prevent the belts from gripping and dragging on hard
surfaces.
2. Grip the handles firmly, and position ProPaddle well out in front of
your body.
3. Run the ProPaddle at full throttle for 3 - 5 minutes on a rough,
abrasive surface such as worn asphalt paving. Allow the ProPad-
dle's weight to fully rest on the paddle belts.
4. After break-in, the paddle belt fins will slide easily over the surface
being cleaned, providing more efficient operation on a variety of
surfaces.
sweepIng operaTIon
1. Hold unit from left side, resting sweeper paddles on work sur-
face.
2. Firmly grasp throttle grip with right hand and front handle with
left hand.
3. Position ProPaddle well out in front of your body.
4. Accelerate to full throttle and allow paddles to push debris ahead.
Sweep to an area where debris can be piled and collected.
WARNING
Do not operate ProPaddle with paddles close to your body, which
could result in loss of control and possible serious injury.
P
P
a
ro
addle
ttachment
o
'
Perator
s
11
m
anual
Advertisement
Table of Contents
