Table of Contents
Advertisement
from the Edit and R-click pop-up menus, or dragging/dropping with the mouse. The behavior
of each edit operation differs slightly depending on the source and destination tabs. For
conciseness, the examples given below describe edit operations using only Edit menu
commands and drag/drop operations.
Found Devices Tab
Within the Found Devices tab, device settings can only be copied from one hardware device to
another; they cannot be cut or deleted as they can in the Design tab.
To copy the settings from one device to another:
1.
<CLICK>
the Found Devices tab to select it.
2. With DX Navigator online,
3. Select Copy from the Edit menu.
4.
<CLICK>
the device whose settings you wish to overwrite and select Paste from the
Edit menu.
OR
5.
<CLICK+DRAG>
device whose settings you wish to overwrite.
6. The Password dialog opens (if you have not previously logged in during this session).
Login as an administrator.
<CLICK>
on the device whose settings you wish to copy.
the device whose settings you wish to copy and
<DROP>
it onto the
14
Advertisement
Table of Contents
