EAW DX1208 Instruction Manual page 12

12. Connect the DX1208 USB port to a USB port on your
computer using a standard USB cable. Turn on the DX1208
and the New Hardware Wizard will start.
Select "Locate and install driver software (recommended)."
13. Select "I don't have the disc. Show me other options."
14. Select "Browse my computer for driver software
(advanced)."
12
– DX1208
15. Click the "Browse" button and navigate to C:\Program
Files\EAW\Data\FTDI\DX1208 (or other location if you chose
to install the drivers somewhere else). Click "Next" to
continue.
16. The installer will begin installing the driver software. A
warning may appear indicating that Windows can't verify
the publisher of the driver software. Click "Install this
driver software anyway."
17. When the driver software has been installed, the following
screen notifies you that the software has been successfully
installed. This completes the first half of the driver
installation. Click "Close" to continue.