Install Batteries; Connect External Devices - Napa MCD381 User Manual

Using player
Getting Started
1
Unpack
Make sure your player includes the following accessories:
MCD381 MP3/WMA CD player with FM tuner
•
Quick Start Guide
•
Power Adapter
•
2

Install batteries

1 Press the OPEN button to release the latch and lift the top of the MCD381 player.
2 Remove the battery compartment cover on the inside of the MCD381.
3 Insert the two supplied batteries. Ensure the batteries are inserted properly by matching the + and –symbols on the battery with
the symbols on the MCD381.
4 Replace the battery compartment cover and close the MCD381 player.
5 Plug the supplied Adaptor into DC IN port on the side of MCD381 and into a power outlet.
NOTICE: When using the MCD381 for the first time, the Ni-MH battery should be charged for 10 hours. The battery charge
mechanism of MCD381 is designed to be slow charge mode. This slow charge mode aims to extend the durability of the Ni-MH battery
and to ensure that they are always fully charged. However, you are advised to restrict the charging time within 10 hours from
time to time.
3

Connect External Devices

1. Connect the supplied earphones to the EARPHONE jack on the side of the player.
2. To use the Remote Control, plug the earphone cable to into the Remote Control, then plug the Remote Control cable into the
EARPHONE port on the side of player
Contents
•
Manual CD
• 1
Warranty Card
•
MCD381 8cm CD/MP3/WMA PLAYER-FM TUNER
Earphones • Carry case
Line Remote control with LCD
•
Two AAA NI-MH rechargeable batteries
•
Using player
4
Getting started