This warranty gives you specific legal rights. You may have additional rights that vary from state to state, and country to country. In the interests of product development, Drawmer reserve the right to modify or improve specifications of this product at any time, without prior notice. DRAWMER 1968 MkII PERATOR’S...
MkII DUAL CHANNEL VACUUM TUBE COMPRESSOR INTRODUCTION The 1968 MkII is a 1U Tube/FET dual channel / ‘stereo an external equalizer for vocal stressing or de-essing. bus’ compressor which by design delivers a transparent ‘open’ sound even during periods of heavy compression.
1968 MkII WIRING The side chain feature on the 1968 MkII is part of the compressor feedback stage and would normally be connected to a normalised or semi-normalised pair of patchbay contacts. This would allow the user to insert additional EQ for some de-essing, or frequency conscious compression.
POWER CONNECTION The 1968 MkII unit will be supplied with a power cable suitable for domestic power outlets in your country. For your own safety, it is important that you use this cable to connect to the mains supply earth. The cable must not be tampered with or modified.
Release Times 100 ms (Fixed) 500 msec (Fixed) 1 sec (Fixed) Semi-Auto 200 ms to 2 sec Signal dependent Semi-Auto 500 ms to 5 sec signal dependent Automatic 1 sec to 10 sec signal dependent DRAWMER 1968 MkII PERATOR’S ANUA...
• Use the Output Gain control to restore any level lost due to compression. • If necessary, change the Attack and Release settings to suit the material. DRAWMER 1968 MkII PERATOR’S ANUA...
CHAPTER 3 GENERAL INFORMATION It is the responsibility of the installer to ensure that the continuous power rating of the speakers is not exceeded, as Drawmer Electronics Ltd will not accept any responsibitlity for speaker damage caused by incorrect settings.
Need help?
Do you have a question about the 1968 MKII and is the answer not in the manual?
Questions and answers