Table of Contents
Advertisement
Sending Words Between Books
This BOOKMAN dictionary can send
words to and receive words from cer-
tain other BOOKMAN books.
To send a word, you must first install a
book card in your BOOKMAN, and
that book card must be able to send
or receive words. To learn if a book
card can send or receive words, read
its User's Guide.
1. Highlight a word in this book.
See "Highlighting Words" in this
User's Guide.
2. Hold
and press
3. Highlight the other book.
4. Press
EINGABE
The other book may automatically
enter your word. However, if your
word stops at the initial screen of
the receiving book, simply press
to look it up.
EINGABE
.
KARTE
.
Resetting BOOKMAN
If the BOOKMAN keyboard fails to re-
spond, or if its screen performs errati-
cally, first press
twice. If nothing happens, follow
AN/AUS
the steps below to reset it.
Warning: Pressing the reset button
with more than very light pressure may
permanently disable your BOOKMAN.
In addition, resetting BOOKMAN erases
settings and information entered into its
built-in book, and in an installed book card.
1. Hold
CLEAR
If nothing happens, try Step 2.
2. Use a paperclip to gently press
BOOKMAN's reset button.
The reset button is recessed in a pin-
sized hole on the back of BOOK-
MAN. Look for it on the battery
cover or near the book card slot.
Troubleshooting BOOKMAN
• Make sure your book card, if
any, is installed correctly.
• Check that the book card's
metal contacts are dirt-and dust-
free.
31
and then press
CLEAR
and press
AN/AUS
.
Advertisement
Table of Contents
