Outputs
Use the Freq and Q rotary controls for channels 1–4 to select
2.
PRE or POST for AUX1, AUX2, AUX3, and AUX4.
The default setting is POST.
When you change the setting, the selected value flashes.
Press the
[EXIT]
3.
Muting AUX Sends
You can mute the AUX Send Masters by turning off the [ON] key for
the Master channel.
Since the Master
Send master outputs, depending on the Fader Mode, you need to
press the
[AUX1], [AUX2], [AUX3]
before you can mute it.
Press the
[AUX1], [AUX2], [AUX3]
1.
Send.
The selected AUX key flashes.
Use the MASTER
2.
When AUX Sends are configured as stereo pairs, their
are linked (see "Pairing Channels" on page 68).
See "[ON] Keys" on page 34 for more information.
SOLO
ON
118
key to display the CHANNEL EDIT function page.
key can also mute the Stereo Buss and Effects
[ON]
, or
[AUX4]
, or
button to turn the AUX Send on and off.
[ON]
Master ON key
key to select an AUX Send
key to select an AUX
[AUX4]
[ON]
buttons
VM200 UserÕs Guide