Vivotek FE8172 User Manual page 29

Video Stream: This Network Cmera supports multiple streams (stream #1 ~ #3) simultaneously. You
can select any one of them for live viewing. For more information about multiple streams, please refer to
page 58 for detailed information.
Manual Trigger: Click to enable/disable an event trigger manually. Please configure an event setting
before enabling this function. A total of 3 or 4 event settings can be configured. For more information
about event setting, please refer to page 99. If you want to hide this item on the homepage, please go
to the System > Homepage Layout > General settings > Customized button to deselect the "show
manual trigger button" checkbox.
Digital Output: Click to turn the digital output device on or off.
PTZ Control Panel:
Start to Auto Pano
Pano.: Click this button to start the automated circular rotation through a regional view (360° continuous
rotation). Note that this function does not apply in a Panoramic view because a Panoramic view already
shows the full coverage.
Stop: Click this button to stop the Auto Pano and Auto Rotate functions.
Rotate: Once the Administrator has determined a list of preset PTZ positions, click this button to
command the camera to consecutively display views of these positions. The Network Camera will display
these views continuously. For more information, please refer to PTZ settings on page 96.
Pan speed
-5
-4
-3
-2
-1
0
1
2
3
4
5
Pan /Tilt /Zoom /Panoramic/Rotate: Adjust the speed of these controls:
Left
Down
Zoom Out
Stop Auto Pano/Rotate
Tilt speed Zoom speed
-5 -5
-4 -4
-3 -3
-2 -2
-1 -1
0 0
1 1
2 2
3 3
4 4
5 5
Up
Return to Home Position
Right
Zoom In
Start to Auto Rotate
Panoramic Rotate speed
speed
- -
- -
- -
- -
- -
0 0
1 1
2 2
3 3
4 4
5 5
VIVOTEK
Slower
Faster
User's Manual - 29