Vivotek CC8130 User Manual page 157

7.33 IR cut control
Group: ircutcontrol (capability.nvideoinprofile > 0)
NAME
mode
daymodebegintime
daymodeendtime
bwmode
7.34 UART control
Group: uart (capability.nuart > 0)
NAME
ptzdrivers_i<0~19,
127>_name
ptzdrivers_i<0~19,
127>_location
enablehttptunnel
Group: uart_i<0~(n-1)> n is uart port count
NAME
baudrate
databit
VALUE DEFAULT
auto, auto
day,
night,
di,
schedule
00:00~23:59 07:00
00:00~23:59 18:00
<boolean> 1
VALUE DEFAULT
string[40] <product
dependent>
string[128] < product
dependent >
<boolean> 0
(capability.nuart > 0)
VALUE DEFAULT
110,300,600,12 9600
00,2400,3600,4
800,7200,9600,
19200,38400,57
600,115200
5,6,7,8 8
6,7,8
URL Command Document for All Series
SECURITY DESCRIPTION
(get/set)
6/6 Set IR cut control mode
6/6 Day mode begin time
6/6 Day mod end time
6/6 Switch to B/W in night mode
if enabled
SECURITY DESCRIPTION
(get/set)
1/4 Name of the PTZ driver.
1/4 Full path of the PTZ driver.
4/4 Enable HTTP tunnel channel
to control UART.
SECURITY DESCRIPTION
(get/set)
4/4 Set baud rate of COM port.
4/4 Data bits in a character
frame.
57
VIVOTEK
User's Manual - 157