Table of Contents
Advertisement
/S
Specifies that the entity to be started up is a service. This parameter is mandatory.
/A
Indicates that ExpressCluster will not identify it as an error if the service has
already started and is running. Please specify this parameter in case the start up
type of the service is [AUTOMATIC] (in Settings-> Control Panel ->
Administrative Tools -> Services)
/WAIT time
Used to specify the time in seconds required for waiting for the completion of
service startup. If this parameter is specified, the control is not returned until
service startup is completed or until time does not exceed the specified waiting
time. This parameter can be omitted. If the parameter is omitted, waiting for
startup completion will not be executed. The specified range is from 0 to 3600. If
0 is specified, waiting time becomes infinity.
/INT time
Used to specify the time in seconds for re-starting a single service or a restart
interval of the script. This parameter can be omitted. If the parameter is omitted,
the re-start interval is 0 seconds. This parameter becomes effective when /R or/R,
/SCR option is specified. Specified range is from 0 to 3600.
service-name
This is the name of the service that you would like to monitor. This is case
in-sensitive. e.g. If you would like to monitor the Telnet service, use Start-
>Settings-> Control Panel -> Administrative Tools -> Services and double click
on Telnet service. Use the service name as tlntsvr as shown below:
110
Advertisement
Table of Contents
