Vertu Signature RHV-2 Reference Manual page 77

Your Vertu phone will lose its date and time
settings if the battery is removed for more than
approximately 2 hours.
Inserting the battery
Refer to "Inserting the Battery" on page 3 for
information on inserting the battery correctly.
VEHICLE CHARGER
The vehicle charger recharges your Vertu phone
battery quickly and safely from a standard 12 or 24
volt (DC) vehicle cigarette lighter outlet.
Only use the vehicle charger specifically designed
for use with your Vertu phone.
Never attempt to use a vehicle charger if it has
been damaged.
Only use the vehicle charger in a stationary vehicle.
The time taken to charge your battery depends on
its existing charge. A discharged battery will take at
least 90 minutes to charge. You can use your
phone normally during the charging process,
although this will increase the time to charge.
03
Attach the charger cable
>
into the adaptor body.
Insert the charger
>
connector into the
bottom of your Vertu
phone as shown.
Some cigarette lighter sockets are only powered
when the vehicle ignition is switched on.
The vibrating alert is disabled while the charger is
connected to your Vertu phone.
When the battery is fully charged, the battery
charge indicator stops animating. Disconnect the
car charger from the cigarette lighter outlet before
you unplug it from your Vertu phone.
DATA CABLE
The data cable when used in conjunction with
Vertu PC Suite, enables you to manage your Vertu
phone and to use it as a modem to transfer data.
Connecting the data cable
The headset will not operate if the headset
connector is plugged into the back of the data
cable connector.
Connect the charger to
>
the powered cigarette
lighter outlet.
The green indicator light
>
will illuminate to show
the charger is connected
to the power outlet. A
confirmation message is
displayed if your Vertu
phone is switched on.
Connect the end of the
>
data cable with the screws
attached to the Serial
(COM) port of your
compatible computer,
ensuring it is seated
properly.
Tighten the screws.
>
Ensure your Vertu phone is
>
switched on.
Insert the data cable
>
connector into the bottom
of your Vertu phone as
shown. (Your data cable
connector may be slightly
different to the one shown.)
If necessary, with the data
>
cable inserted, you can
also connect the charger to
your Vertu phone.
Plug the charger connector
>
into the back of the data
cable connector as shown.
69