Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for TerraTec MIDI HUBBLE
Summary of Contents for TerraTec MIDI HUBBLE
- Page 1 TERRATEC PRODUCER MIDI HUBBLE English Manual Version 1.0, from: August 2004...
- Page 2 CE Declaration TerraTec Electronic GmbH, Herrenpfad 38, D-41334 Nettetal, Germany hereby declare that the product: TerraTec Producer MIDI HUBBLE, to which this declaration refers is in compliance with the following standards or standard- izing documents: 1. EN 55013 2. EN 55020...
-
Page 3: Table Of Contents
Installing the Control Panel in MAC OS X (OS 10.3.3 or higher)........ 6 Notes for Windows users..................... 7 Notes for Macintosh users................... 7 The ports of the MIDI HUBBLE module ............... 7 The front panel ......................7 The rear panel ......................8 The control panel. -
Page 4: Welcome
Welcome! We're pleased that you've chosen a product from the TerraTec Producer line for your musical endeavors and would like to congratulate you on your decision. With the MIDI HUBBLE System, you've purchased a sophisticated piece of state-of-the-art studio equipment. Thanks to its wealth of options and proven technology, it will serve you well—... -
Page 5: Notes On Usb Interface, Hub And Power Supply
Notes on USB interface, hub and power supply The MIDI HUBBLE USB interface is based on the USB 1.1 bus, but can of course also be connected to a USB 2.0 port. The MIDI HUBBLE provides three additional USB 1.1- compliant ports for connecting additional peripherals. -
Page 6: Self-Powered Operation With Separate Ac Adapter
CD and manually launch the installer “MIDI HUBBLE Setup Vx.x.exe”. 3. Follow the instructions of the installation program. When the installation is complete, the MIDI HUBBLE system will be available in all relevant applications as a MIDI device. Installing the Control Panel in MAC OS X (OS 10.3.3 or higher). -
Page 7: Notes For Windows Users
The MIDI HUBBLE Control Panel is installed together with the drivers. Notes for Macintosh users. The MIDI HUBBLE is shipped with driver support for MAC OS 10 (OS X). In the OS10 version, we recommend the Apple operating system update called “Jaguar” (current version 10.3.3). -
Page 8: The Rear Panel
USB interface and power supply starting on page 5. Use the USB UP-LINK socket to connect the MIDI HUBBLE to a USB 1.1 or USB 2.0 port on your computer or on a USB hub. The included 1.8 m USB cable or any other USB cable with a maximum length of 5 m can be used for this purpose. -
Page 9: Led Filter
Important note: The connection to the computer must not be interrupted during the firmware update process (around 5 to 10 seconds). In the event of such an interruption, the MIDI HUBBLE must be sent in for reprogramming. The costs thus incurred are not covered by the manufacturer's warranty. -
Page 10: Midi Thru
This function lets you configure the routing of the MIDI inputs and outputs. When using the MIDI HUBBLE with a Windows system, the changes made here will not be executed as long as any other software (Cubase, etc.) is accessing the MIDI HUBBLE driver. -
Page 11: Appendix A-Technical Data
Windows 2000 or Windows XP System requirements MAC G3 400 MHz 128 MB RAM 1 USB 1.1 or 2.0 port* OS X (10.3.3 required for Control Panel) * optional AC adapter required if the computer's USB port is not self-powered. MIDI HUBBLE (English)
Need help?
Do you have a question about the MIDI HUBBLE and is the answer not in the manual?
Questions and answers