TC Electronic VPD I User Manual page 5

1 Output
1/4" jack connection.
2 Remote Control Connection
With external relays such as the ones available on a TC Electronic
G-System it is possible to externally switch modes on the VPD1.
The VPD1 connection is a stereo 1/4" jack.
• Tip to ground alternates On/Off
• Ring to ground alternates Boost On/Off
• Tip and ring not connected gives Bypass mode.
3 Power Input
VPD1 needs an external power supply capable of delivering 9VDC
120mA.
4 Input
1/4" jack connection for input signal.
5 Boost
When Boost is activated, the Drive channel is driven harder, thus
giving more overdrive. The Boost control setting determines the
amount of boost that is sent to the Input of the drive channel.
OVERVIEW & FUNCTIONS
5