Download Print this page

Talon Tools AKA004 User Manual page 3

Cultivator attachment

Advertisement

Fig. 2A
Fig. 2B
MAINTENANCE INSTRUCTIONS
TINE REMOVAL AND REPLACEMENT
All 4 tines should be replaced at the same time because
they will wear evenly through normal use. Work on one
side at a time.
WARNING:
To prevent serious personal injury,
always wear heavy gloves when handling the
tines.
1. Unplug the power cord before cleaning or performing
maintenance or removing or installing tine.
2. Remove the clevis pin clips (A) and clevis pins (B).
(See Fig. 3A)
3. Remove the tines (C) and felt cushions (D) from the
shaft (E). (See Fig. 3B)
4. Clean and oil the shaft.
5. The tines are stamped with the letter "R" or "L" to iden-
tified their position on each side of the gearbox when
facing the front of the unit.
6. Replace the tines (C) and felt cushions (D) onto the
shaft with the hubs on the tines facing each other.
7. Ensure the tips on tines are allgned in the same direc-
tion with each other before reinstalling the clevis pins
and pin clips.
8. Repeat this procedure on the opposite side.
NOTE:When installed correctly, there will be an "R" and
"L" tine on each side of the gearbox and the tips on the
tines line up in the same direction. It is important that the
tines are installed correctly.
Allgn Tips
C
A
D
B
D
Shaft
L
Fig. 3A
Fig. 3B
MAINTENANCE AND STORAGE
1. Keep machine, attachments and accessories, including
where appropriate the battery, in safe working condi-
tion. If appropriate, remove the battery to protect it from
frost and properly charge it if necessary.
2. Check shear bolts, engine mounting bolts and other
bolts at frequent intervals for proper tightness to be
sure the equipment is in safe working condition.
3. Inside a building store the machine away from ignition
sources. Allow the engine to cool before storing in any
enclosure.
4. Always refer to the user Manual instructions for impor-
tant details if the cultivator is to be stored for an extend-
ed period.
5. Do not attempt to repair the machine unless you have
the proper tools, and instructions for disassembly and
repair of the machine.
R
L
4
GB

Advertisement

loading