Subscribe to Our Youtube Channel
Related Manuals for SPT SP-4201
Summary of Contents for SPT SP-4201
- Page 1 INSTRUCTION MANUAL HOT WATER DISPENSER WITH DUAL-PUMP SYSTEM Models: SP-3201 (3.2 Liters) SP-4201 (4.2 Liters) Thank you for purchasing this appliance. Read all instructions carefully before use.
-
Page 2: Parts Introduction
The important information, herein, is intended to prevent possible injuries Parts Introduction and damage to the appliance. Please follow accordingly. General Safety Precautions Always unplug appliance from the main electrical supply outlet before cleaning or when not in use. Always attach the power cord to the appliance BEFORE you plug it to the main electrical supply. -
Page 4: Before Using
Do not fill above the maximum level Do not place on or near a hot gas or 12. Do not attempt to repair the appliance, contact Sunpentown. mark inside the tank or lower than electric burner, or a heated oven. -
Page 5: Cleaning And Maintenance
Using the dispenser for the first time Cleaning and Maintenance Wash and rinse inner tank with water. Disconnect power and allow appliance to cool before cleaning. Fill water up to full line. Disconnect power from wall outlet and remove cord from receptacle. Boil once and discard water by pumping it out. -
Page 6: Important Guidelines
Unit will not switch to Keep Warm conditions. In such conditions, unit may Parts, which are replaced, become the property of Sunpentown. keep boiling or not reach boiling point. The warranty applies for the use of the product in the USA only.
Need help?
Do you have a question about the SP-4201 and is the answer not in the manual?
Questions and answers