Congratulations on your Sunforce Purchase. This product is designed to the highest technical specifications and standards. It will supply years of maintenance free use. Please read these instructions thoroughly prior to installation, then store in a safe place for future reference. If at any time...
Page 3
Installation Figure 1 Choose an area as flat as possible, to set up the frame. (Fig 1) Separate the two triangular supports using the screw bar utilizing the supplied screws and nuts Lay your 80 Watt solar panel onto the frame, lining up the pre-drilled frame holes with the corresponding holes in the framework.
Should you still have operational problems change the Carbon Brush’s and or Diaphragm. WARRANTY The 80 Watt Solar Water Pump is covered by a one year limited warranty, and must be tested under optimal conditions. This warranty does not apply in the event of misuse or abuse and or repairs and alterations.
Need help?
Do you have a question about the 80 WATT SOLAR WATER PUMP and is the answer not in the manual?
Questions and answers