To Configure The Fsae Collector Agent - Fortinet Network Adapter FSAE Technical Note

Configuring FSAE on Windows AD
10

To configure the FSAE collector agent

1 From the Start menu select Programs > Fortinet >
Fortinet Server Authentication Extension > Configure FSAE.
2 Enter the following information and then select Save and Close.
Monitoring user logon events
Support NTLM authentication
Domain controller monitored
Global User Ignore List
FortiGate Group Filter
Sync Configuration
Listening ports
FortiGate
DC Agent
Logging
Log level
Log file size limit
Authentication
Require authenticated
connection from FortiGate
Enable to automatically authenticate users as they
log on to the Windows domain.
Enable to facilitate logon of users who are connected
to a domain that does not have the DC Agent
installed.
Select the domain controllers that you want to monitor
for users logging on.
Exclude users such as system accounts that do not
authenticate to any FortiGate unit. See
the Global Ignore List" on page
Configure group filtering for each FortiGate unit. See
"Configuring FortiGate group filters" on page
Copy this collector agent's Global Ignore List and
Group Filters to the other collector agents to
synchronize the configuration. You are asked to
confirm synchronization for each collector agent.
You can change port numbers if necessary.
TCP port for FortiGate units. Default 8000.
UDP port that DC Agents use. Default 8002.
Select the minimum severity level of logged
messages.
Enter the maximum size for the log file in MB.
Select to require the FortiGate unit to authenticate
before connecting to the Collector Agent.
Fortinet Server Authentication Extension Version 1.5 Technical Note
Using FSAE on your network
"Configuring
11.
11.
01-30005-0373-20071001