Sony TV & Home A/V Connection Manual page 6

1. Turn on the TV and the set-top box.
2. Tune the TV to the correct channel for receiving the signal from the set-top box (usually
channel 3 or 4).
Important: It may be necessary to select either channel 3 or 4 as the RF out on the set-top box.
Check for a switch or menu setting to select the appropriate setting.
If there is picture and sound on the TV, you have connected the set-top box correctly.
3. Turn on the DVD / BD player.
4. Insert a disc into the DVD / BD player.
Note: DVD players can only play standard DVDs. BD players can play both BDs and standard
DVDs.
5. Tune the TV to the composite video input to which the DVD / BD player is connected, for
example, VIDEO 1.
6. Press the PLAY button on the DVD / BD player remote control.
7. If there is a picture and sound from the movie on the TV, you have connected the player
correctly.
Watch satellite or cable TV
1. Turn on the TV and the set-top box.
2. Tune the TV to the correct channel for receiving the signal from the set-top box (usually
channel 3 or 4).
4. Tune your set-top box to the desired channel.
Watch a DVD or BD movie
1. Turn on the TV and DVD / BD player.
2. Insert a disc into the DVD / BD player.
3. Tune the TV to the composite video input to which the DVD / BD player is connected, for
example, VIDEO 1.
4. Press the PLAY button on the DVD / BD player remote control.
© 2010 Sony Electronics Inc. All rights reserved.
6