Sonnet Tempo SATA EDGE ExpressCard/34 Quick Start Manual

Before Using the Tempo SATA edge ExpressCard/34
Prior to connecting a drive enclosure and inserting the Tempo SATA
edge ExpressCard/34 into your computer, familiarize yourself with
the parts. We also recommend that you read the section in your
computer's user manual that addresses ExpressCard use.
Figure 1 shows the Tempo card's eSATA port. A data cable with
eSATA connectors is required for use with the Tempo card and drive
enclosures. Bare SATA drives and some old drive enclosures use SATA I
connectors; use of these devices with the Tempo card requires a cable
with a SATA I connector at one end. Figure 2 shows both eSATA and
SATA I connectors.
eSATA connector
T SATA
™
empo
E C
xpress ard
Serial ATA Host Controller
for ExpressCard | 34 Slot
User's Guide
eSATA connector
SATA I connector
Quick Start Guide for Tempo SATA edge
edge
ExpressCard/34
34
|
You Should Have
The following items should be included in your product package:
• One Tempo SATA edge ExpressCard/34 adapter
• One CD
The following items are required (sold separately):
• One Serial ATA drive enclosure
• One external Serial ATA (eSATA) data cable

System Requirements

The Tempo SATA edge ExpressCard/34 host adapter card requires the
following in order to operate in your system:
• ExpressCard/34 or ExpressCard/54 slot
• Mac OS X Version 10.4 or later, or Windows
®
SP2 installed
Support Note:
included Installer CD, but it may not be the latest version
available. Before using this product, check the version number of the
software on the CD and what's available at www.sonnettech.com/
support/ and install the newer version, if available. Windows users must
have an active Internet connection in order to download and install the
drivers for the Tempo card.
Software Installation Steps for Mac OS X Users
Before using the Tempo SATA edge ExpressCard/34 card with your
computer, you must run the driver installation software.
1. Insert the included CD into the computer's optical drive; when
the CD appears on the desktop, double-click the Sonnet E1P/
E2P/E342P Installer icon, and then double-click the Tempo_
SATA_E1P_E2P_E342P_Vxxx.pkg file to launch the installer; when
the Welcome to the SonnetSATA E1P/E2P/E342P Installer window
appears, click Continue.
2. When the Important Information window appears, click Continue.
3. When the Software License Agreement window appears, read the
license, click Continue, and then click Agree.
4. When the Select a Destination window appears, accept the default
destination or choose a new destination, and then click Continue.
5. When the Easy Install window appears, click Continue, enter
your name and password, and then click OK.
6. While the driver is installed, a progress bar appears. When the
Software was successfully installed screen appears, click Close; you
may now use the Tempo card with your system.
7, Vista
®
Mac users may use the software on the
, or XP with
®