Advertisement
Quick Links
Advertisement
Summary of Contents for DaySequerra Mono2Stereo
- Page 1 4 Channel Stereo Synthesizer Mono2Stereo User Manual...
- Page 2 We sincerely hope our products help you achieve a new level of excellence in your work! David V. Day and the DaySequerra Team DaySequerra | 154 Cooper Rd. #902 | West Berlin, NJ 08091 | Voice 856-719-9900 | Facsimile 856-719-9903 | www.daysequerra.com M2S User Manual...
- Page 3 Analog to Analog, Digital to Digital, Analog to Digital or Digital to Analog. All rights reserved DaySequerra Corp. Copyright 2010. All logos and trademark used herein are the property of their respective owners. Specifications subject to change. M2S User Manual Mono2Stereo User Manual Revision B.1 for firmware 3.17.13...
- Page 4 If Mono2Stereo is subjected to a strong RFI field, such as those emitted from portable two way radios, the display may “blank out”. To restore the display without rebooting the unit, turn the rotary encoder to activate the main menu, and then press HOME.
- Page 5 The user should use only shielded and/or grounded cables to combat sources of interference. This equipment has been designed and built by DaySequerra corporation to give many years of trouble free service and is backed by our three year warranty and commitment of providing the best customer support.
- Page 6 With three included default pre-set profiles and four user defined profiles, Mono2Stereo is versatile enough to allow fine adjustments render any audio to perfection. The diagram below shows a Mono2Stereo taking a mono audio source, and creating a stereo mix using the proprietary Neural Audio process.
- Page 7 Please take a few minutes to complete the warranty registration form on our website, www.daysequerra.com. The Mono2Stereo chassis has four rack mounting holes and has been designed to fit in a standard 1RU space. Plastic ‘finishing’ washers are recommended to protect the painted surface around the mounting holes.
- Page 8 ENTER KEY - Used to enter a menu or confirm a selection. This key will also clear an error message display from the home screen. HOME KEY - A press of this button will return Mono2Stereo to its home screen, or enter home screen selection mode.
- Page 9 AES OUTPUTS - Four 75 BNC connectors output the synthesized stereo AES3 digital audio stream. AES SYNC - Two 75 BNC connectors that allow Mono2Stereo to receive an AES REF or DARS clock signal from an external source and pass it on to other devices in the same stack.
- Page 10 Figure 1. Metering display Mono2Stereo. The meter display on Mono2Stereo is arranged into four groups of three meters each, with each group representing a single channel. Display Digital Analog The table demonstrates which display matches up with 1 (L), 2 (R) which physical port on Mono2Stereo.
- Page 11 Figure 2. Home Screen on Mono2Stereo. Mono2Stereo has been designed with ease of use in mind. Most of the common settings are available for modification right on the home screen. While the unit is at this screen, press the HOME key to invoke home screen selection mode;...
- Page 12 If AC line power is lost or momentarily interrupted, Mono2Stereo will revert to its previous state. To enter the programming menu, turn the rotary encoder in any direction while at the HOME screen. The ENTER key will enter the currently selected sub menu or enter the value mode for the selected option.
- Page 13 These presets were designed as starting points for you to become comfortable with the operation of Mono2Stereo. It is recommended that you start with one of these presets, and then tailor it to your preferences. You may save customized settings within four user-definable save slots.
- Page 14 To disable automatic keylock, select “OFF” from this menu. Navigating to SYSTEM MENU after entering the Main Menu will allow you to change all values to fine tune the operation of your Mono2Stereo. M2S User Manual...
- Page 15 DHCP address by default. Device Name: Allows you to change Mono2Stereo’s name as reported to DNS. Press ENTER while the cursor is over this field to go into data entry mode. Turn the rotary encoder to scroll through the available choices of letters (A-Z, 0-9 and _ (underscore)) and press enter to move on to the next field.
- Page 16 No Sync: AES sync has been lost. Please check the source equipment and all cable connections. Ensure that Mono2Stereo is operating in the proper input mode for your application and is looking for the source audio on the correct port.
- Page 17 The factory setting for advanced routing is disabled on Mono2Stereo. In this default configuration, each of the Mono2Stereo channels can be seen as directly relating to that respective physical input and output ports. That is, channel one will receive input from AES or analog port one, and the resulting audio output drives AES and analog port one outputs.
- Page 18 255.255.255.0. Select OK to close the dialog, and then OK to close the properties box. 5. If Mono2Stereo is set up for DHCP, disable it and enter a static IP address within the local network range. (Example: 192.168.0.2) Details are available in the NETWORK section of this manual.
- Page 19 DaySequerra warrants this product to be free from defects in materials and workmanship to its original owner for three (3) years from the date of purchase. DaySequerra will repair or replace such product or part thereof that upon inspection by DaySequerra, is found to be defective in materials or workmanship subject to conditions contained herein.
- Page 20 Manufactured under license from DTS Licensing Limited. DTS is a registered trademark & the DTS Logos and Symbol are trademarks of DTS, Inc. © 2008-2009 DTS, Inc. All Rights Reserved. 20 DownMix User Manual ...
Need help?
Do you have a question about the Mono2Stereo and is the answer not in the manual?
Questions and answers