Timeout Settings - Snom 4S NAT Filter Admin Manual

message at level 5 ("Web callback: Code 200 for 123456@192.168.1.2")
on every response that the filter receives, it shows the response code and
the call-id. The format of the body has a simple line-oriented format.
Each line contains a parameter name and a parameter value. The
parameter value and the name are separated by a colon, just like in most
http and sip requests. Line break escapes like in SIP are not allowed. All
parameters are optional; if not present nothing is changed. The following
parameters are allowed:
•
"from": This parameter contains the new value for the from-header.
It may include the display name, therefore the corner bracket style
must be used. Example: from: "1234" <sip:1234@snom.com>
• "to": Same for to-header.
• "uri": The new value for the request-URI. The filter copies the
content like it is into the request-URI. Therefore, it must contain the
scheme (usually, "sip") and no corner brackets. Example: uri: sip:
1234@route1.snom.com
For programming your web server, please consult your web server
manual. Samples and advice are available from snom on demand.

4.4 Timeout Settings

In contrast to previous versions, the time related settings
have been summarized on this new management web page. The filter
differentiates between registration related settings and call related
settings.
42 • Confi guration
[ 4 S N A T F
S N O M
]
I L T E R