1. Manuals
  2. Brands
  3. SIIG Manuals
  4. Disc Duplicator
  5. Cool USB 2.0/eSATA to SATA Docking...
  6. Quick installation manual

SIIG Cool USB 2.0/eSATA to SATA Docking Duplicator Quick Installation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Cool USB 2.0/eSATA to
SATA Docking Duplicator
Quick Installation Guide
Introducing the SATA Docking Duplicator
The Cool USB 2.0/eSATA to SATA Docking Duplicator
adds extra storage space to your computer and works as
a standalone duplicator without PC connection.
Features and Benefits
•
Works as a standalone duplicator. No PC
connection needed
•
Dual-bay design allows duplication of two 2.5- or
3.5-inch (or mix) hard disk drives
•
Supports both eSATA* and Hi-Speed USB (USB
2.0) interfaces
•
Built-in silent cooling fan effectively extends hard
disk drive life
•
Supports hard disk drive capacity up to 750GB
(2.5-inch) and 2TB (3.5-inch)
*Note: When connected to an eSATA host adapter
without port multiplication support, only one
hard disk will be recognized.
System Requirements
•
PC or Mac computer with an available eSATA or
USB port (USB 2.0 recommended)
•
Windows
(32-/64-bit) / Server 2003 & 2008 (32-/64-bit) /
2000
•
Mac OS
04-0612A
7 (32-/64-bit) / Vista (32-/64-bit) / XP
®
X v10.4.8 or later
®
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Cool USB 2.0/eSATA to SATA Docking Duplicator and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SIIG Cool USB 2.0/eSATA to SATA Docking Duplicator

  • Page 1 Cool USB 2.0/eSATA to SATA Docking Duplicator Quick Installation Guide Introducing the SATA Docking Duplicator The Cool USB 2.0/eSATA to SATA Docking Duplicator adds extra storage space to your computer and works as a standalone duplicator without PC connection. Features and Benefits •...

  • Page 2: Package Contents

    Package Contents • Cool USB 2.0/eSATA to SATA Docking Duplicator • Switching power adapter • USB 2.0 cable & eSATA cable • Rubber pads • Quick installation guide Layout Source Drive Activity LED (flashes while transfering or receiving data) Target Drive Activity...

  • Page 3: Hardware Installation

    Hardware Installation Boot up the computer. Make sure the SATA connector of the Cool USB 2.0/ eSATA to SATA Docking Duplicator and SATA hard disk drive are in alignment. Gently insert the hard disk drive(s) into the SATA drive slot of the Cool USB 2.0/eSATA to SATA Docking Duplicator.
  • Page 4 Using the SATA Docking Duplicator Because of the heat generated, be careful not to touch the hard disk drive(s) while in use. Do not remove or insert a hard disk drive when the Cool USB 2.0/eSATA to SATA Docking Duplicator is powered on. Windows Connecting to USB One or two additional drive icons will appear in...
  • Page 5 Windows 7 Verify that the Activity LED is OFF before proceeding. Click Show hidden icons, then click Safely Remove Hardware and Eject Media icon located in the system tray. Click Eject USB to ATAPI Device, and wait for the confirmation box. At Safe to Remove Hardware confirmation box, you can safely unplug or turn off the Cool USB 2.0/ eSATA to SATA Docking Duplicator.
  • Page 6 Highlight USB Mass Storage Device, click Stop. Click OK, click OK again, then Close. You can now unplug or turn off the Cool USB 2.0/ eSATA to SATA Docking Duplicator. Disconnecting from eSATA Open Windows Device Manager. Double click Disk Drives, right click the target disk, select Uninstall, click OK.

  • Page 7: Duplicate Disk

    Duplicate Disk The Duplicate function creates an exact copy of the source hard disk drive onto the target hard disk drive. This is a standalone function and works without computer connection. Unplug the Cool USB 2.0/eSATA to SATA Docking Duplicator from the computer. Install the source hard disk drive and target hard disk drive into the appropriate drive bay.

  • Page 8: Windows Disk Management

    Windows Disk Management When installing a brand new hard disk drive or a blank hard disk drive into the Cool USB 2.0/eSATA to SATA Docking Duplicator, use Windows' Disk Management utility to prepare it for use. Please visit Microsoft support site at, http://support.microsoft.com/kb/ 309000, for help and instructions.
  • Page 9 Q1 My Cool USB 2.0/eSATA to SATA Docking Duplicator is plugged into the computer, when I press the Duplicate button nothing happens. How can I duplicate my disk? A1 Power off the Cool USB 2.0/eSATA to SATA Docking Duplicator, unplug it from the computer and try again.
  • Page 10 Blank Page...

  • Page 11: Technical Support And Warranty

    Step 1: Submit your RMA request. Go to www.siig.com, click Support, then RMA to submit a request to SIIG RMA. Your RMA request will be processed, if the product is determined to be defective, an RMA number will be issued.
  • Page 12 Fremont, CA 94538-3152, USA Phone: 510-657-8688 Cool USB 2.0/eSATA to SATA Docking Duplicator is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Microsoft andWindows are registered trademarks of Microsoft Corporation. All other names used in this publication are for identification only and may be trademarks of their respective owners.

Table of Contents