Wavecom GR64 Migration Giude page 30

AT Command
AT*E2EMM
AT*E2SSN
AT+COPS
AT*E2SMSRI
AT+CMGF
AT+CMGS
AT+CMGD
AT+CMGL
AT+CMGR
AT+CNMI
AT+CPMS
AT+CSCS
AT+CSMP
AT+CSCB
Migration Guide
GR4x to GR64
Page 25 of 28
Function
Engineering Monitoring
Mode
SIM Serial Number
Operator Selection
Ring indicator for SMS
Message Format
Send Message
Delete Message
List Message
Read Message
New Message Indications
Preferred Message Storage
Select Character Set
Set Text Mode Parameters
Select Cell Broadcast
Message Type
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable
Differences in GR64 compared with GR47/48
5 - Active settings
7 - Modem configuration profile
9 - PnP information
Same as GR47/GR48 command
Same as GR47/GR48 command
Same as GR47/GR48 command
Same as GR47/GR48 command
Same as GR47/GR48 command
Same as GR47/GR48 command
Same as GR47/GR48 command
Same as GR47/GR48 command
Same as GR47/GR48 command
<bfr> added as a new parameter as follows:
Buffered unsolicited reports defined within this
command are cleared when <mode> 1...2 is
entered.
<mode> value changed
from: value 3
to: values 0,1,2
Same as GR47/GR48 command
Same as GR47/GR48 command
Same as GR47/GR48 command
Same as GR47/GR48 command
GR4x to GR64 Migration Guide