Table of Contents
Advertisement
RS232 interface for GT47 embedded apps UART
2.5 Spare Connections
The spare soldering terminal, T7, is provided to easily lengthen the
connection from the GT47 to the application hardware.
provided in the developer's kit is a fixed 1 metre length, with tinned-copper
flying leads. In the event of the general purpose input wire length being
too short, an extension wire can be joined using the spare terminal hole in
T7.
Terminal T7 is not electrically connected to the RS232 PCB
electronics so signals carried on it will not affect RS232 operation.
LZT 123 7698 R1B
The cable
8
Advertisement
Table of Contents
