ViewSonic VT2430 User Manual page 24

Using the Display Features
To Restore Factory Setting
1. Press the 功能選項 button to display the OSD main
menu.
2. Press ◄ or ► to select the "Setup" menu.
3. Press ▲ or ▼ to select "Reset", then press ► and select
"Yes" to restore the the factory default setting.
Using PC Function
1. When in PC source, press the 功能選項 button to
display the OSD main menu.
2. Press ◄ or ► to select the "Picture" menu.
3. Press ▲ or ▼ to select "Contrast", "Brightness",
"H-Position", "V-Position", "Clock", or "Phase", and
adjust the level with ◄ or ►.
4. Press ▲ or ▼ to select "Color Mode", then press ◄ or ►
to select your desired option. To adjust the level of Red,
Green, and Blue separately, select "User".
5. Press ▲ or ▼ to select "Auto Adjust", then press ► to
perform Auto Adjust function.
＊When in PC source, the other menus are the same as or
similar to when in other source.
＊When there is no signal in PC mode, "No Signal" will
be displayed on the screen and the Display will
automatically turn into power-saving mode after a few
seconds' idleness.
Press 訊號源 or 電源 button on the remote control and
the Display will return to PC mode.
ViewSonic 22 VT2430