Sony Ericsson GT47 Technical Description page 7

Gsm/gprs control terminal
Hide thumbs Also See for GT47:
Table of Contents

Advertisement

1.3.4 Data Services
1.3.5 Fax Services
1.3.6 Supplementary Services
1.3.7 Serial Communication
LZT 123 7607 R1B
1. INTRODUCTION
The GT47 supports the following data protocols:
GT47 is a Class B terminals, which provide simultaneous activation
and attachment of GPRS and GSM services. GT47 is a GPRS class 8
(4+1) enabled devices, which are capable of transmitting in one
timeslot per frame (up link), and receiving at a maximum of four
timeslots per frame (down link).
GT47 is a capable of establishing a CSD communication at 9.6 kbps.
GT47 supports HSCSD class 2 (2+1) communication, with one
timeslot per frame capacity in the up link and two timeslots per frame
capacity in the down link.
The GT47 allows fax transmissions to be sent and received by commercial
fax software installed on the application computer. Group 3 fax Classes 1
and 2 are supported.
• Call forwarding
• Call hold, waiting and multiparty
• Calling/called number identification
• Advice of charge
• USSD
• Alternate line service
• Customer service profile
• Preferred networks
• Operator selection
• Network registration
• Call barring
• Call transfer
The GT47 enables an end-to-end communication path to be established
between the telemetry/telematics application, either hosted internal or
connected externally, and a remote terminal or host, via the GSM network.
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gt48

Table of Contents