Apricorn Ez backit pro User Manual page 9

�� ������
������ � �������� �������� ��������
12. When the transfer is completed, a message appears on the screen. Press any key
to shutdown the computer.
13. Before you restart the computer, disconnect the Ez Backit pro from the
computer.
14. When the computer reboots, it will display a message saying, "Transfer
Successful." After a couple seconds the computer will continue booting into
Windows.
Create your first backup image using Image EZ.
1. Once the EZ Gig II software is installed, consult the Image EZ manual, located
on your EZ Gig II CD, for detailed instructions on using Image EZ. These
instructions are exclusive for creating a backup image of your hard drive on your
EZ BackIt Pro.
2. Under certain conditions, Apricorn EZ Gig II may need to restart your computer.
Please save all work before starting Apricorn EZ Gig II.
3. To Start EZ Gig II, click the Start button, go to Programs Apricorn EZ Gig II
and click on Apricorn EZ Gig II. This will open the main screen of EZ Gig II.
You can also click on the Apricorn EZ Gig II icon on the Desktop.
4. Select "Create Image" from the main screen to open Image EZ.
5. At the first screen, select the drive or partition(s) you would like to backup. A red
line will appear under the drive or partition(s) chosen. After selecting the drive
or partition(s), click Next.
6. This will open the Image Archive Location window. Select fixed hard disk and
click the Next button.
7. At the Image Archive Creation Window, find your EZ Backit Pro. It will have
the name Apricorn, but the drive letter will vary depending on the configuration
of your computer.
���
7