Site Survey - AOpen AOI-811 User Manual

If WPA-PSK is selected, click the configuration button. The popping window is as
the below. Please enter the key.
Auth. Mode: There are three modes available to choose.
Open Authentication – the sender and receiver do not share secret Key for
communication. Instead, each party generates its own key-pairs and asks the other
party to accept it. The key is regenerated when the connection is established every
time.
Shared Authentication – the sender and receiver shares the common key for
data communication, and the key is used for extended length of time.
Auto – depends on the communication to establish, and automatically uses the
proper authentication mode.
The following will only be activated to allow for configuration when Encryption is
enabled.
Default Key: select one of the 4 keys to use.
Network Key: enter values in these fields, either in HEX or ASCII formats. You
only have to enter the key that you will use.
Key Length: select 64 or 128 bits as the length of the keys.
Key Format: ASCII or HEX

3.4 Site Survey

This page allows you to enable the Site Survey function to scan for the available
wireless network (wireless clients and Access Points) and establish wireless
communications.
13