AOpen AOR-401 User Manual page 20

1-2-2 Fixed IP
If the Internet Service Providers assign a fixed IP address, choose this
option and enter the assigned IP address, subnet mask, gateway IP and
DNS IP addresses for your Broadband Router.
1-2-3 Dial-up xDSL (PPPoE)
If connected to the Internet using a Dial-up xDSL (PPPoE) Modem,
the ISP will provide a Password and User Name, then the ISP uses
PPPoE. Choose this option and enter the required information, if the
ISP provided a Service Name, enter it in the column of the Service
Name field, otherwise, leave it blank.
The MTU feature specifies the largest packet size permitted for
network transmission. Enter the value desired, for most DSL users, it
is recommended to use 1492.
By default, MTU is set at 1492.
The Maximum Idle Time
feature can control the
connection time while user's
need to save the cost of
connection fee from ISP
provider (default time=0,
always connect). Click on the
Connect-on-demand button to dial up to the ISP when only on demand,
while there is a need of connecting to the ISP automatically.
18